Collect more accurate data faster and easier - no matter what the job or the environment, with the Trimble® R10 GNSS System. Built with powerful technologies like Trimble HD-GNSS, Trimble SurePoint , Trimble CenterPoint® RTX, and Trimble
xFill® , integrated into a sleek design, this unique system provides Surveyors with a powerful way to increase productivity in every job, every day.
The advanced Trimble HD-GNSS processing engine provides markedly reduced convergence times as well as high position and precision reliability while reducing measurement occupation time.
Faster measurements, increased accuracy, and greater quality control
With this system, surveyors don't have to switch focus from the controller screen to the pole bubble to check that the pole is plumb. The Trimble controller displays an electronic bubble.
The system constantly monitors pole tilt and compensates while the point is automatically or manually measured. If a point is measured with pole tilt beyond a user-defined setting, Trimble Access software will give an alert and prompt the
surveyor to accept or discard the point. Trimble SurePoint even uses the pole tilt as a controlling input. After a point is measured, tilting the pole causes the system to automatically prepare to measure the next point.
Future Proof Your Investment
Powerful Trimble 360 receiver technology in the Trimble R10 supports signals from all existing and
planned GNSS constellations and augmentation systems. With two integrated Trimble Maxwell - 6 chips, the Trimble R10 offers an unparalleled 440 GNSS channels. Trimble delivers business confidence with a sound GNSS investment for
today and long into the future.
Ergonomically Designed
As the smallest and lightest integrated receiver in its class, the Trimble R10 is ergonomically designed to provide the surveyor with effortless handling and operation. Designed for ease of use, the progressive design incorporates a more stable centre of mass at the top of the range pole, while its sleeker, taller prole provides the durability and reliability for which Trimble is known.
Positioning Performance
Horizontal 0.25m + 1ppm RMS
Vertical 0.50m + 1ppm RMS
SBAS differential positioning accuracy - typically <5m 3DRMS
Static GNSS surveying: High-Precision Static
Horizontal 3mm + 0.1ppm RMS
Vertical 3.5mm + 0.4ppm RMS
Static and Fast
Horizontal 3mm + 0.5ppm RMS
Vertical 5mm + 0.5ppm RMS
Real Time Kinematic surveying
Single Baseline <30km
Horizontal 8mm + 1ppm RMS
Vertical 15mm + 1ppm RMS
Network RTK
Horizontal 8mm + 0.5ppm RMS
Vertical 15mm + 0.5ppm RMS
RTK start-up time for specified precisions 2 to 8 seconds
Trimble CenterPoint RTX
Horizontal 4cm
Vertical 9cm
RTX convergence time for specified precisions 30 minutes or less
RTX QuickStart convergence time for specified precisions 5 minutes or less
Trimble xFill
Horizontal RTK + 10mm / minute RMS
Vertical RTK + 20mm / minute RMS
Features
Dimensions (W×H): 11.9cm x 13.6cm (4.6in x 5.4in)
Weight: 1.12kg with internal battery, internal radio with UHF antenna, 3.57kg with additional range pole, controller and bracket
Temperature: -40°C to +65 °C (operating) / -40° C to +75 °C (storage)
Humidity: 100% condensing
Ingress Protection: IP67