The Megger TDR2000/3 Dual Channel TDR has a large, high resolution, colour, WVGA display with easy set up features. Directional control buttons, together with soft keys, provide intuitive and easy operation for the user. An AUTO selection option ensures that the most effective parameters are selected depending on the range required, aiding rapid diagnosis of the TDR trace.
The ability to manually override the auto function allows fine tuning to enable identification of hard to determine faults. Dual trace and dual cursor capabilities allow full flexibility, giving the operator full control and instant indication of distance between two points.
A trace comparison feature also allows close examination between trace conditions. Extra high resolution
together with a white-light backlight, user definable tones and colour give the graphical display a vibrance, aiding the user in
identifying key events on the trace. Megger's own built-in AutoFind mode allows for speedy identification of faults.
100 internal trace memories provide for the storage and recall of test results.The traces can be recalled
to the display for analysis or compared with an active display to aid in fault location. Alternatively the stored results can be
downloaded to a computer, via the USB port, using the TraceXpert software and USB lead provided.
The TDR2000/3 has a minimum resolution of 0.1m/0.3ft and a 20km/60kft maximum range depending on the velocity factor
selected and the cable type.
Five output impedances are available (25, 50, 75, 100, 125 ohms) and an auto impedance matching feature. The velocity
factor can be set between 0.2 and 0.99 to meet any cable test requirements.